Before You Start - Graco Pro Pack 24F893 Operation

Before You Start

Before You Start
The ProPack Portable Spray Pack is shipped with a bat-
tery inside the air compressor which must be connected
before operation.
1. Remove contents from backpack including any
packing materials.
2. Remove air compressor from reservoir lid.
3. Open battery door on flat side of air compressor.
ti17593a
4. Remove 9V alkaline battery and remove shipping
seal from battery terminals.
5. Pull battery connector out of air compressor.
ti17591a
3A1292C
ti16510a
ti17825a
6. Connect battery and place inside air compressor.
7. Replace battery door.
ti17595a
8. Turn on power switch to test battery (red LED light
should turn on).
ti17824a
ti17596a
3