Bikespeed RealSpeed Instruction For The Installation
For panasonic mid-engine design
Hide thumbs
Also See for RealSpeed:
- Instructions for the installation and description of the functions (32 pages) ,
- Instruction for the installation (28 pages) ,
- Instruction for the installation (12 pages)
Related Manuals for Bikespeed RealSpeed
Summary of Contents for Bikespeed RealSpeed
- Page 1 Instructions for the installation and description Panasonic of the functions for mid-engine design year 2017 with Flyer FIT display … … for further information visit date: 31.08.2017 page 1...
-
Page 2: Product Description
Product description The bikespeed-RS is a simple and compact kit to bypass the speed limit of 25 km/h of Panasonic mid-design drives from year 2017 with Flyer FIT display. The installation is completely invisible. In contrast to other commercial tuning kits for pedelecs the bikespeed-RS displays the "real"... -
Page 3: Description Of Functions
Pushbutton down (new level: ‘Eco‘) Pushbutton up (new level: ‘Std‘) If you have a bikespeed-RSc you use the combination you chose beforehand. (see page 6, paragraph ‘Hint for the custom-variant‘) Please enter the combination quickly within about 3 seconds. Repeat the procedure if necessary in order to obtain the desired setting. - Page 4 Therefore change the level of support 3x down and then 3x up within 3 seconds. Begin on the highest level. In case of success the entire battery index will blink 3x and meanwhile the software state of the bikespeed-RS will be shown on the speed indicator. Now the tuning is in service mode and maintenance as well as software updating can be executed.
- Page 5 Hint: If you are not sure, whether the service-mode is activated, please uninstall the bikespeed-RS before you update! After activating the service mode, we recommend to switch off the bike without moving it again. If a speed is displayed it could change the trip, avg- or max-speed.
- Page 6 The configuration options can be found in the shop on our website. There all possibilities are described with many tips and videos. If you are interested to upgrade your standard bikespeed RS on a custom version, you can feel free to contact us.
- Page 7 Please inquire about legal consequences that may result for you from installing and using the tuning before you use it. We expressly point out that using the bikespeed-RS leads to a loss of warranty by the manufacturer. Furthermore there are no claims to product liability for your pedelec/e-bike viable for the manufacturer and bikespeed.
-
Page 8: Help In Case Of Problems
Help in case of problems If your bikespeed-RS doesn’t work correctly at any given time please check the following steps in order to help yourself. Should you still have problems please write an email before sending back the bikespeed-RS. Cause Solution - bicyce doesn’t start or... - Page 9 - bikespeed-RS (c) can not - Keep in mind you have to switch the switched on or off stages to enter the combination. Please start in a sufficient high or low stage. page 9...
- Page 10 Example installation on a Flyer Uproc 7.0 In order to get to the necessary connectors for the connection of the bikespeed-RS the gravel deflector of your engine has to be removed. To do this you have to dismount the treadle on the opposite side of the chain guide.
- Page 11 Please remove the battery before working on your bicycle! Loosen and remove the two screws shown on the right side (chain side) with an Allen key size 6 On the left, loosen the screw (1) shown on the left with a 6-inch Allen key.
- Page 12 Locate the connectors to the display (black, round, 5-pin) and to the speed sensor (white, rectangular, 2-pole). These are probably hidden in the frame. Just follow the cables. Disconnect the connectors newly found. page 12...
- Page 13 The tuning is simply interposed. Make sure that all connectors are properly engaged. Stow the bikespeed-RS as well as all connectors and cables in the frame tube. Fold the engine carefully back up into its position. Be careful not to squeeze or hurt cables.
- Page 14 page 14...
- Page 15 page 15...
-
Page 16: Eu Declaration Of Conformity
GmbH Winterhaeuser Str. 109b 97084 Wuerzburg hereby declares that the following product: Name of the product: bikespeed-RS Year of construction: 2017 is in accordance with all appropriate regulations of the EMV-guideline (EMC) 2004/108/EU as well as the RoHS-guideline 2011/65/EU.
Need help?
Do you have a question about the RealSpeed and is the answer not in the manual?
Questions and answers