ASSEMBLY AND INSTALLATION
T0517 T0518 T0519 T0522 T0523 T0524
WARNING:
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting plate (A)
Green Grounding Screw (E)
Green Grounding Screw (E)
Outlet Box
House Grounding Wire
Mounting Plate (A)
Mounting Screw (B)
Headless Screw (D)
Lock Nut (F)
Wire Connector (C)
Fixture Grounding Wire
Fixture Wire
Installation Steps
Turn off the power at fuse or circuit box
1. Thread two headless screws (D) through the mounting plate (A), and then secure them with four lock nuts (F)
(two on each side of the mounting plate (A).) Adjust the length of the headless screws (D) if necessary.
Note: Make sure the headless screws are lined up horizontally to make the fixture will be level.
2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B).
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Mounting Screw (B)
Lock Nut (F)
Wire Connector (C)
Ball Nut (G)
Back Plate
Headless screw (D)
Rubber Pad (H)
Ball Nut (G)
Rubber Pad (H)
Bulb Type A MAX 60W
(not included)
190612