Vaxcel T0541 Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION
T0541 / T0543
W
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d'alimentation principale au panneau
central de disjoncteurs avant d'installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Cross Bar Unit (A)
Outlet Box
House Grounding Wire
Wire Connector (C)
Cross Bar Unit (A)
Headless Screw
Green Grounding Screw
Mounting Screw (B)
Fixture Grounding Wire
Fixture Wire
Installation steps
Turn off the power at fuse or circuit box.
1. Remove the two bolt nuts (D), the two rubber pads (E)
and the cross bar unit (A) from the backplate.
2. Attach the cross bar unit (A) to the outlet box using
two mounting screws (B). Adjust the length of the
preinstalled headless screws if necessary.
Note: Make sure that the headless screws are lined
up horizontally to make the fixture level.
INSTRUCTIONS
Mounting Screw (B)
Backplate
Wire Connector (C) Bolt Nut (D) Rubber Pad (E)
Fixture
Bolt Nut (D)
Rubber Pad (E)
Socket
Max.60W Type T Bulb
(not included)
Glass Shade
Set Screw x 3
Metal Frame
191127