Operation Safety; Fuel Safety - McCulloch B428PS Operator's Manual

FOREWORD
This machine can be dangerous if used incorrectly or
carelessly, and can cause serious or fatal injury to the
operator or others. It is extremely important that you
read and understand the contents of this operator's
manual.
This manual describes the basic safety precautions for
working with the machine.
The operator is responsible for following the
instructions and warnings on the machine and in the
manual.
Be thoroughly familiar with the controls and the proper
use of the machine.
read, understand, and will follow the instructions and
warnings on the machine and in the manual.
Never allow children to operate this machine.
If you encounter a situation where you are uncertain
how to proceed you should ask an expert.
Avoid all usage which you consider to be beyond your
capability.
If you need assistance, contact your authorized
service dealer or call customer support.
CLOTHING AND EQUIPMENT
Dress properly. Always wear safety glasses or
similar eye protection when operating or performing
maintenance on your machine.
to noise can result in permanent hearing impairment.
Always wear face or dust mask if operation is dusty.
Always wear heavy, long pants, long sleeves,
boots, and gloves. Wearing safety leg guards is
recommended. Being fully covered also helps
protect you from debris and pieces of toxic plants
thrown by the machine.
Always wear foot protection. Do not go barefoot
or wear sandals. Stay clear of spinning blade or
trimmer line.
Secure hair above shoulder length. Secure or
remove loose clothing or clothing with loosely
hanging ties, straps, tassels, etc. They can be
caught in moving parts.

FUEL SAFETY

Pour fuel outdoors.
Do not smoke or allow smoking near fuel or the
machine.
Avoid spilling fuel or oil. Wipe up all fuel spills.
Move at least 3 metres away from the fueling site
before starting the engine.
Stop the engine and let it cool before removing the
fuel tank cap.
Always stow petrol in a container approved for fuel.
WORK AREA
Inspect the area before starting the machine.
glass, and wire that can rebound, be thrown, or
otherwise cause injury or damage during operation.
Ensure that people and animals do not come into
contact with the cutting attachment or loose objects
that are thrown out by the cutting attachment.
SAFETY
Keep others including children, animals, bystanders,
and helpers at least 15 metres away. Bystanders
should be encouraged to wear safety glasses. Stop
the engine immediately if you are approached.
Do not use the machine unless you are able to call
for help in the event of an accident.
Do not use the machine in bad weather such as
dense fog, heavy rain, strong wind, or intense cold.
Working in bad weather is tiring and often brings
added risks.
Make sure you can move and stand safely. Check
the area around you for possible obstacles such as
roots, rocks, branches, and ditches in case you have
to move suddenly. Take great care when working on
sloping ground.

OPERATION SAFETY

Use the machine only for trimming, scalping, mowing
and sweeping. Do not use for edging, pruning or
hedge trimming.
Stay alert. Do not operate this machine when you
drugs, or medication. Watch what you are doing; use
common sense.
Never start or run inside a closed room or building.
Breathing exhaust fumes can kill.
Keep handles free of oil and fuel.
Always keep the engine on the right hand side of
your body.
level and away from all parts of your body. A hot
stand on unstable surfaces such as ladders, trees,
steep slopes, and rooftops.
Use only for jobs explained in this manual or
manuals for optional attachments.
Never put the machine down with the engine running
or while the cutting attachment is rotating.
Always slow the engine to idle speed after each
working operation. Long periods at full throttle
without any load on the engine can lead to serious
engine damage.
Neither the operator of the machine nor anyone
else may attempt to remove the cut material while
the engine is running or the cutting equipment is
rotating, as this can result in serious injury. Stop
the engine and cutting equipment and disconnect
the spark plug cap from the spark plug before you
remove material that has wound around the blade
shaft as otherwise there is a risk of injury.
The bevel gear can get hot during use and may
remain so for a while afterwards. Allow time to cool.
You could get burned if you touch it.
Watch out for thrown objects. Always wear approved
eye protection. Never lean over the cutting
attachment guard. Stones, rubbish, etc. can be
thrown up into the eyes causing blindness or serious
injury.
Keep unauthorized persons at a distance. Children,
animals, onlookers and helpers should be kept
outside the safety zone of 15 metres. Stop the
machine immediately if anyone approaches. Never
behind you to make sure no one is within the safety
zone.