Cleaning And Storage; Maintenance And Replacement - Lanaform Visage+ User Manual

4. CLEANING AND STORAGE:

• Clean the rubber tip after each usage. Use a dry cloth to wipe off any residues of
cream.
• Always use a damp cloth to clean the appliance; do not use alcohol, acetone,
abrasive products etc.
Cleaning the fi lter:
Step 1: Remove the rubber tip.
Step 2: Remove the fi lter protection (small white cover) with tweezers, and turn
the appliance over to obtain the small metallic fi lter in your hand. Rinse and
clean both.
Step 3: Dry with a towel and place them back in the appliance.

5. MAINTENANCE AND REPLACEMENT:

If the suction force decreases and is not adequate for use, replace the batteries.
In addition, weak suction force can be caused by a clogged fi lter. Clean the fi lter
before using the appliance again.
J. Application from the middle of the nose to the
edge of the eye.
1 Filter protection; 2 Filter
Note:
Be careful not to mislay the fi lter and its cover while cleaning
them because they are small parts.
Retain the product storage box for future usage.
EN
7