FUTABA FX-3/FMT-01 Software Update

1M23Z04702
Your Futaba FX-32/FMT-01 transmitter programming can be updated easily online. When functions are added or
improved, the update file can be downloaded from our website. Copy the update files to the SD card and then use
the following procedure to update the program.
Check our web site for the FAQ regarding updating for more information.
[Updating procedure]
Note: If the battery fully discharges during
program updating, updating will fail. When
the remaining battery capacity is 50% or less,
always recharge the battery before updating.
Note: The model data in the transmitter can
be used unchanged after updating, but to
be safe, back up the model data before
updating.
1.
Download the zip file of the update data from
our website.
Futaba WEB
FX32/FMT-01 Update
Zip file Download
2.
Extract the zip file on your computer.
3.
The "FUTABA" folder will be created on your
computer.
4.
Copy the "FUTABA" folder into your SD card.
Copy the "FUTABA"
folder into your SD card.
Note: If the SD card has already had "another
FUTABA" folder before you make a copy, the
"FUTABA" folder is OVERWRITTEN.
FX-32/FMT-01 Software Updating
- 1 -
5.
Insert the SD card with "FUTABA" folder that
contained the update software into the SD card
slot on your transmitter.
Installed SD card of the
update file
6.
Turn on the transmitter power while pressing
down the "Home/Exit" button. The update
screen appears on the LCD display of your
transmitter and the software update is started.
②
Press the Home/Exit button and turn ON
①