Download Print this page
Sharp BP-30M28 Installation Manual
Sharp BP-30M28 Installation Manual

Sharp BP-30M28 Installation Manual

Digital multifunctional system
Hide thumbs Also See for BP-30M28:

Advertisement

Quick Links

Manual de instalare
BP-30M28 / BP-30M31 / BP-30M35
Considerente generale privind instalarea echipamentelor de printing:
- Manipularea echipamentelor se face respectand procedurile de
transport si punere in locatie tinand cont de gabaritul echipamentului si
a spatiului destinat acestuia
- Respectarea normelor privind conectarea la reteaua electrica, folosirea
de prize cu impamantare este obligatorie
- Fixarea corecta a echipamentului pe standul acestuia
- Verificarea cu atentie si eliberarea tuturor blocajelor folosite la transport
(inclusiv cel pentru scanner, unitati developare, cilindrii, etc)
- Montarea corecta a tonerelor in echipament dupa agitarea prealabila
(atentie unele echipamente nu au tonerul in echipament ci separat)
- Manipularea cu atentie a cilindrilor evitand pe cat posibil expunerea
prelungita a acestora la lumina.
- Manipularea cu atentie a cuptorului tinand cont de temperatura
acestuia
- Temperatura ambientală unde se folosesc aparatele şi echipamentele
trebuie să fie între 18 şi 30 grade celsius, cu grad minim de praf şi
umiditate.
pentru
multifunctionale
SHARP

Advertisement

loading
Need help?

Need help?

Do you have a question about the BP-30M28 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sharp BP-30M28

  • Page 1 Manual de instalare pentru multifunctionale SHARP BP-30M28 / BP-30M31 / BP-30M35 Considerente generale privind instalarea echipamentelor de printing: - Manipularea echipamentelor se face respectand procedurile de transport si punere in locatie tinand cont de gabaritul echipamentului si a spatiului destinat acestuia...
  • Page 2 Transit, Installation (using) environment, Note CONFIGURATION......1-1 BP-30M28/30M31/30M35(MAIN UNIT)..2-1 BP-DE11 (STAND/2x500 SHEET PAPER DRAWER)..3-1 BP-DS12/DS13(HIGH STAND/LOW STAND) .
  • Page 3 [1] CONFIGURATION BP-30M35 System diagram BP-30M35 CONFIGURATION 1 – 1...
  • Page 4 [2] BP-30M28/30M31/30M35(MAIN UNIT) BP-30M35 Unpacking B. Fixing tape and protection material removal A. Unpacking Remove the packing box. Remove cushioning material and plastic bags. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 1...
  • Page 5 BP-30M35 [6] SIMULATION Service Manual General and purpose The simulation mode has the following functions, to display the machine operating status, identify the trouble position and causes in an earlier stage and to efficiently setup and adjust the machine for improved serviceability.
  • Page 6 CD- ROM (Excluding EU and SCA/SCNZ) Starting guide Protection sheet Glass cleaner (with RSPF) (2) Scanner (2/3 mirror unit) lock release Remove the optical unit fixing screw, and remove the note label. Attache the protection sheet. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 2...
  • Page 7 The first tray and the second tray of the main body have a mecha- nism that only one can be pulled out. Open the front cover. (4) Removal of the drum protection sheet. Open the right door and pull out the transfer spacer from side door unit. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 3...
  • Page 8 While rotating the MG roller in the arrow direction, supply the developer into the developer tank evenly so as not to overflow. * Shake the developer bag enough before opening it. Remove the screws. Attach the DV top cover. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 4...
  • Page 9 OFF. Confirm that "COMPLETE" is displayed. [Confirmation items] • COMPLETE is displayed. • There is no error (EE-EL, EE-EU, EE-EC) display. • Check that there is no abnormal noise in process un. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 5...
  • Page 10 Used to set YES/NO of the toner save mode (Only in UK and Japan versions) * For other destination versions, this setup is made by the user program. Used to set YES/NO of counting when non-print paper is passed through each counter. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 6...
  • Page 11 Execute SIM 64-5 to print the print test pattern. Print density should change gradually from lighter to darker. Make sure that the density does not shift oppositely. The density level of all colors should be equal. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 7...
  • Page 12 MAIN-CS1/SUB-CS1, and tap OK button. (The cursor can be used instead of the button.) After entering the adjustment values, print again and check to confirm that the avoid amounts are adjusted to the target range. BP-30M35 BP-30M28/30M31/30M35(MAIN UNIT) 2 – 8...
  • Page 13 BP-30M35 [3] BP-DE11(STAND/2x500 SHEET PAPER DRAWER) Unpacking B. Removal of the fixing tape and protection material A. Packed items check Removal of the stand/2x500 sheet paper drawer. C. Removal of the fixing tape and protection material Remove the stand/2x500 sheet paper drawer from the polyethyl- ene bag, and remove the fixing tape and the protection material.
  • Page 14 OFF the power switch. Disconnect the power plug from the power outlet. B. Install the main unit to the BP-DE11 (BP-30M28/BP-30M31/BP-30M35) Use man power of two persons to lift the main unit. Since Rear cabinet has not been screwed, remove the tape and keep the Rear cabinet out of reach.
  • Page 15 Place the main unit on BP-DE11. Remove the screws and the rear cover. Pay attention to the position of the boss which is the connection part of BP-DE11. Lower the main body straight. Align the left and right connecting plates with the screw holes on the body and fasten them with screws.
  • Page 16 Connect the harness to the Desk control PWB as shown in the fig- ure. Pass the harness through the hole. Cut the area shown in the following figure. (the main unit) Connect the harness to the main body PCU PWB and perform wire processing.
  • Page 17 10) Return the rear cover to the main unit and the BP-DE11. 12) Attach the size display sheet to the tray and return the tray to the BP-DE11. 11) Return the tray to the main unit and the BP-DE11. 13) After installing the desk, make adjustments referring to [2] BP- 30M28/30M31/30M35(MAIN UNIT) 3.B.(5).
  • Page 18 BP-30M35 [4] BP-DS12/DS13(HIGH STAND/LOW STAND) Unpacking BP-DS13 Unpack the package, and check to confirm that all the parts are pro- vided. BP-DS12 Quantity Name BP-DS13 BP-DS12 Fixing screws (M4×10 S-tyte) Fixing screws (M4×10 P-tyte) Fixing plate Front L Fixing plate Front R Fixing plate Rear Installation The connection with the main unit is the same as below.
  • Page 19 Put the main unit on the stand. Fix the stand with the main unit by the fixing screw. Fit the positioning pins of the Stand (2 places) with the positioning BP-DS13 holes of the main unit. Connect to BP-DS13 Connect to BP-DS12 BP-DS12 BP-30M35 BP-DS12/DS13(HIGH STAND/LOW STAND) 4 –...
  • Page 20 Fix the tray of main unit. Fix the rear cabinet. Rotate the adjusters to fix the machine to the floor surface not to move the machine. Connect to BP-DS13 Connect to BP-DS12 BP-30M35 BP-DS12/DS13(HIGH STAND/LOW STAND) 4 – 3...

This manual is also suitable for:

Bp-30m31Bp-30m35