Honda 08B23-SJC-100 Installation Instructions Manual page 5

6. Insert a plastic trim tool into the groove in the
instrument panel, and release two clips. Pull the
instrument panel out toward you to release 18 clips,
and remove the instrument panel (unplug the vehicle
connectors).
VEHICLE
CONNECTORS
VEHICLE
CONNECTORS
18 CLIPS
7. Remove the driver's console side trim (three clips
and one retaining tab).
DASHBOARD CENTER
LOWER COVER
RETAINING
TAB
DRIVER'S
CONSOLE
SIDE TRIM
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
VEHICLE
CONNECTORS
INSTRUMENT
PANEL
2 CLIPS
PLASTIC
810706C
TRIM TOOL
7D2004A
3 CLIPS
8. Remove the right sunvisor screw cover (four
retaining tabs).
RIGHT SUNVISOR
9. Remove the right sunvisor (two T-25 torx screws and
unplug the vehicle connector).
10. Remove the right front grab rail screw covers (four
retaining tabs).
SCREW
COVER
RETAINING
TABS
11. Remove the right front grab rail (two screws).
AII 50347 (1308)
VEHICLE
CONNECTOR
4 RETAINING
TABS
T-25 TORX
SCREWS
2 RETAINING
TABS
SCREW
RIGHT FRONT
GRAB RAIL
SCREW
SUNVISOR
SCREW
COVER
810704A
SCREW
COVER
810702A
5 of 28