Honda 08B23-SJC-100 Installation Instructions Manual page 14

51. Route the i-VES harness, DIN cable "A" and DIN
cable "B" to the rear of the vehicle. Go to step 59.
i-VES HARNESS
VEHICLE
FRAME
52. Wrap one urethane tape around the i-VES harness
20-pin connector and the i-VES harness as shown.
i-VES HARNESS
14 of 28
FRONT
DASHBOARD
CENTER LOWER
COVER OPENING
DIN CABLE "B"
DIN CABLE "A"
820407A
URETHANE
TAPE
i-VES HARNESS
20-PIN CONNECTOR
820401A
53. Plug the subharness 20-pin connector into the
i-VES harness 20-pin connector.
SUBHARNESS
20-PIN CONNECTOR
SUBHARNESS
54. At the audio unit opening, route the i-VES harness
and the white label end of DIN cable "B" through the
audio unit opening and towards the vehicle floor
along the vehicle harness.
AUDIO UNIT
OPENING
VEHICLE
FRAME
CENTER LOWER
COVER OPENING
AII 50347 (1308))
i-VES HARNESS
i-VES HARNESS
20-PIN CONNECTOR
i-VES HARNESS
DIN
CABLE "B"
DIN
CABLE "A"
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
820402A
VEHICLE
HARNESS
SUB
HARNESS
WHITE
LABEL
820403B