Honda 08B23-SJC-100 Installation Instructions Manual page 26

108. Position the monitor console on the monitor bracket,
and install the monitor console to the monitor bracket
with two 5 x 16 mm washer-screws and two
5 x 25 mm washer-screws. Do not pinch DIN cable
"A" between the monitor console and the monitor
bracket.
MONITOR
BRACKET
LEFT LENS
WASHER-
SCREWS,
5 x 16 mm
FRONT
109. Install two screw caps, then reinstall the left and right
lenses.
110. Secure the FM modulator bracket to the FM
modulator with one 5 x 8 mm washer-screw included
with the Monitor Kit.
FM MODULATOR
26 of 28
MONITOR
CONSOLE
WASHER-
SCREWS,
5 x 25 mm
RIGHT LENS
2 SCREW
CAPS
820532A
FM MODULATOR
BRACKET
WASHER-SCREW,
5 x 8 mm
820546A
Included with the
Monitor Kit.
AII 50347 (1308))
111. Set the FM modulator switch at 88.5. Using isopropyl
alcohol on a shop towel, clean the area where the
EPT sealer will attach. Using scissors, cut one EPT
sealer in half. Secure the FM modulator cables to the
FM modulator with the half piece of EPT sealer.
SWITCH
88.1 88.9
88.5
FM MODULATOR
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
EPT SEALER
Cut in half.
FM MODULATOR
CABLES
820547A