Advertisement
104. Secure the monitor bracket to the vehicle frame with
four 6 x 12 mm washer-screws.
VEHICLE
FRAME
FRONT
WASHER-SCREWS,
6 x 12 mm
105. Remove the left and right lenses from the monitor
console. Align the
with the
mark on the monitor console, then install
the monitor gasket to the console.
RIGHT LENS
MARK
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
HEADLINER
OPENING
MONITOR
BRACKET
820529A
mark on the monitor gasket
LEFT LENS
MONITOR
CONSOLE
MONITOR
GASKET
820545A
106. Remove the tape securing the 3-pin connector to the
monitor console. Plug the interior light 3-pin
connector and the DIN cable "A" terminal to the
monitor console 3-pin connector and the monitor
console terminal.
DIN CABLE "A"
TERMINAL
MONITOR
CONSOLE
TERMINAL
MONITOR
CONSOLE
3-PIN
CONNECTOR
FRONT
107. Using isopropyl alcohol on a shop towel, clean the
area where the cushion tape will attach. While
holding the monitor console, secure the 3-pin
connectors and the terminals to the monitor console
with one cushion tape.
FRONT
3-PIN
CONNECTORS
AII 50347 (1308)
INTERIOR LIGHT
3-PIN CONNECTOR
TAPE
Remove.
MONITOR
CONSOLE
HARNESS
820530A
MONITOR CONSOLE
MONITOR
CONSOLE
TERMINALS
CUSHION
TAPE
820531A
25 of 28
Advertisement
