Table of Contents
Advertisement
STARTUP:
If the LCD screen is off, press
screen will turn on.
Press the button
indicating that the unit is operating. Press
Follow the instructions detailed in point 5 - STARTING AND STOPPING THE UNIT.
There is a maximum of 3 startup attempts, after which the flashing stop symbol
will be displayed along with the startup failure indicator
The status screen of the Deep Sea 5210 Control Module will indicate all of the
possible events of the Electrical Generator.
This image shows all of the symbols displayed
on the LCD screen (8).
STOPPING THE UNIT:
Follow the instructions detailed in point 5 - STARTING AND STOPPING THE UNIT.
Press
(1) to stop the unit. The unit will be stopped immediately.
USERS MANUAL
RENTAL SERIES ELECTRICAL GENERATOR
(1) to connect the control module and the LCD
(2) and the LED in the top part of the button will turn on,
The LCD display (8) will normally look similar to this:
Example of the screen indicating the voltage readings for
each phase of the Electrical Generator.
(5) briefly to start up the unit.
.
Page 28 of 62
Advertisement
Table of Contents
