Prior To Starting Generator; Electrical Connection - SE Rental Series User Manual

3.2.3

PRIOR TO STARTING GENERATOR

Before starting up the generator, inspect the consumer power supply conductors to
make sure they are in perfect condition and that the consumers are disconnected; the
unit should always be started up at no load.
Make sure that there is nothing obstructing the ventilation ducts and that there are no
foreign objects inside the unit.
Make sure the fluid levels of the Electrical Generator are adequate for the service the
unit will be providing and that there are no leaks or spillage.
3.2.4

ELECTRICAL CONNECTION

The connecting of cables that supply consumers must be performed by qualified
personnel; these conductors should be connected to terminals U V W and N or L1 L2
L3 and N or to the socket panels.
The four-pole circuit breakers have copper bus bars to facilitate the connection with
conductors and prevent deterioration produced by repeated connecting.
Depending on the options selected, sockets may or may not have individual
protection, which is distinguished from the general unit protection by the use of an
individual circuit breaker for each socket.
USERS MANUAL
RENTAL SERIES ELECTRICAL GENERATOR
Page 16 of 62