Table of Contents
Advertisement
The GPM-2 control module has three positions: STOP, Automatic (AUTO) and Manual
(MAN). Key selectable (numbers 14 through 16 of the descriptive chart for the control
module)..
:
STARTUP
When the key is turned to
for low oil level
(9) will be turned on and after 10 seconds the LED indicator (9) will be
turned off, at which point the START button
unit.
Follow the instructions detailed in point 5 - STARTING AND STOPPING THE UNIT.
Note: While the key is in the MAN position, if the button (13) is not pressed within 20 seconds the control
module will shut down the system.
STOPPING THE UNIT:
Follow the instructions detailed in point 5 - STARTING AND STOPPING THE UNIT.
Turn the key to the central STOP position.
USERS MANUAL
RENTAL SERIES ELECTRICAL GENERATOR
(3), battery charge alternator
Manual Mode position, LED indicators
(2), and preheating
(13) can be pressed to start up the
Page 23 of 62
Advertisement
Table of Contents
