Installation Of The Electrical Generator; Unloading And Transport - SE Rental Series User Manual

Generator set
Table of Contents

Advertisement

3 INSTALLATION OF THE ELECTRICAL GENERATOR

3.1

UNLOADING AND TRANSPORT

The unloading and transport of the unit should only be done by qualified personnel,
observing certain minimum safety conditions.
The ground must be capable of supporting the full weight of the Generator and
the forklift.
Make sure that the battery is disconnected.
Make sure that the fuel tank is empty.
Place the open arms of the forklift below the chassis at an equal distance with
respect to the lifting frame.
With a hoist, raise the unit using the lifting frame eyebolt.
The image below shows a generator unit that which includes a frame with a single
lifting point.
If your unit includes a trailer, one of the following may apply:
Trailer 1 - Site trailer: Connected with a DIN hitch ring and safety chains to the
rear of the towing vehicle. Use of this Trailer is not authorized on public roads.
Use the safety brake whenever necessary.
Trailer 2 - Road trailer: Keep in mind the legal considerations detailed in point
3.3.
USERS MANUAL
RENTAL SERIES ELECTRICAL GENERATOR
Image 9 - LIFTING FRAME
Page 13 of 62

Advertisement

Table of Contents
loading

Related Products for SE Rental Series

Table of Contents