Advertisement
Quick Links
Advertisement
Related Manuals for IFM Electronic efector230 UGA
Summary of Contents for IFM Electronic efector230 UGA
- Page 1 Operating instructions Ultrasonic retro-reflective sensor...
-
Page 2: Preliminary Note
1 Preliminary note 1.1 Symbols used ► Instructions > Reaction, result → Cross-reference Important note Non-compliance may result in malfunction or interference. Information Supplementary note. 2 Safety instructions • Installation, electrical connection, set-up, operation and maintenance of the unit must be carried out by qualified personnel authorised by the machine operator. 3 Functions and features Ultrasonic retro-reflective sensor detect without any contact objects made of various materials that interrupt the barrier. -
Page 3: Electrical Connection
The functional specifications refer to a mild steel reflector defined by ifm, at maximum range, with an edge length of 300 mm. The minimum size of the reflector depends on the size of the object. For further information please view "Basic information about installation and operation" → www.ifm.com. When using ultrasonic reflective barriers, please observe the minimum AN_i_1474 Original Scale Drawing (MTD) - Page 4 7 Settings ► Start programming mode of the device. ► Press button 2 s...6 s > LED (yellow) flashes (1 Hz). If programming has not been completed successfully, the device returns to the previous setting. 7.1 Adjust the unit to the reflector ►...
-
Page 5: Operation
8 Operation ► Check whether the unit operates correctly. > Display by LEDs: Green LED is lit The echo is received by the reflector. The object interrupts the ultrasonic reflective barrier, the output is Yellow LED on switched (output function NO). Yellow LED on / Reflector is not detected (output function NO) green LED off...