Mounting The Template Casing - Baxi Luna Sat RPZ-SP+2C Installation And Operating Manual

4. MOUNTING THE TEMPLATE CASING

Install LUNA SAT module inside the casing/template supplied in a separate pack.
Ensure that the model of the template box is correct (L = 600 mm).
Fit the casing/template in a niche in the wall made for this purpose (dimensions indicated in figures 2 and 3) and secure it
with the relative lateral bent pins. Make sure the installation allows easy access for maintenance.
The door and the white frame must be removed and fitted only at the end of the installation phase (check that the key for
opening the door is supplied with the box).
The frame can be depth-adjusted by using the 4 butterfly nuts located in the side guides. In this way it is possible to rest
the frame on the plaster and remove it if the wall has to be painted.
Assemble the system starting from the position of the water connectors on the lower crossbar of the template (recessed
into the casing by: 30 mm).
Install the casing in the stairwell outside the apartment to heat.
L=600
H=850
D=150
Figure 2: template box
INSTALLATION AND OPERATING MANUAL
LUNA SAT
RPZ - SP + 2C
37
7224230.02 - en