Description; Instructions Prior To Installation - Baxi Luna Sat RPZ-SP+2C Installation And Operating Manual

The LUNA SAT user modules make it possible to independently manage heating requirements in centralised systems,
meter the heat distributed to each unit (flat or independently managed area) and transmit heat consumption data via M-
BUS cable.
The following notes and instructions are addressed to installers to allow them to carry out trouble-free installation.
The operating instructions are contained in the "Start-up and operating instructions" section of this manual.
WARNING:
- Do not leave any packaging (plastic bags, polystyrene, etc.) within the reach of children as they are a potential
source of danger.
- The appliance must be housed in the template casing supplied in a separate pack.
- Flush the Domestic Hot Water circuit prior to use.
The module is fitted with a plate exchanger which separates the centralised circuit (primary circuit) from the home heating
circuit (secondary circuit). The module has a high efficiency auto-adaptive modulating circulation pump that can disenga-
ge from the head generated by the column pump to autonomously supply the internal heating circuit.
2. WARNINGS PRIOR TO INSTALLATION
These appliances must be inserted in a centralised heating system, especially designed for this purpose, consistently with
their performance levels and power outputs.
The installer must be legally qualified to install heating appliances.
Initial start-up must be performed by a BAXI S.p.A. authorised Technical Assistance Service, as indicated on the atta-
ched sheet.
Failure to observe the above will render the guarantee null and void. Do the following before connecting the appliance:
• Carefully flush all the system pipes in order to remove any residual thread-cutting swarf, solder and solvents in the
various heating circuit components.
INSTALLATION AND OPERATING MANUAL
FOREWORD

1. DESCRIPTION

33
7224230.02 - en