Software/Driver Unloading - Chelsio T5 Installation And User Manual

Chapter 6. Software/Driver Unloading

6. Software/Driver Unloading

To unload the iSCSI Target driver, follow the steps mentioned below:
i. Log out from the initiator.
ii. Clear the SCST configuration:
[root@host~]# scstadmin -force -noprompt -clear_config /etc/chelsio-
iscsi/scst.conf
iii. Stop all running targets:
[root@host~]# iscsictl -s target=ALL
iv. Unload the driver:
[root@host~]# rmmod chiscsi_t4
[root@host~]# rmmod chiscsi_base
OR,
[root@host]# modprobe –v –r chiscsi_t4
Chelsio T5 iSCSI PDU Offload Target with SCST support for Linux
51