Chelsio T5 Installation And User Manual page 45

Chapter 5. Software/Driver Configuration and Fine-tuning
-r target=<name>
-D <Session
in hex>
-W
-h
server=<IP
address>
[:<port>]
Chelsio T5 iSCSI PDU Offload Target with SCST support for Linux
-k initiator=<name>
handle
id=<isns entity id>
query=<query
interval>
be started or reloaded.
3. If the target=<name> parameter is not
specified, all active targets configurations will
be reloaded from the configuration file while
those targets are running. All non-active
targets specified will not be loaded / started.
For Rules 1-3, if the specified targets are
currently active (running), they will get
reloaded.
For Rules 1 & 2, if the specified targets are not
currently active, they will be started.
For Rules 2 & 3, please note the differences –
they are not the same!
The global settings are also reloaded from the
configuration file with this option.
Retrieve active iSCSI sessions under a target.
target=<name> parameter:
Where name must be a single target name.
If target=<name> parameter is specified as
target=<name>, the sessions can be further
filtered based on the remote node name with
optional –k initiator=<name> option.
Examples:
iscsictl -r target=iqn.com.cc.it1
iscsictl -r target=iqn.com.cc.it1 -k
initiator=iqn.com.cc.ii1
The first target=<name> parameter is
mandatory. If it is not specified, the command
will be denied.
Drop initiator session.
This option should be specified with the handle
of the session (in hex) that needs to be
dropped. The session handle can be retrieved
using the previous mentioned iscsictl option (-r
used to retrieve active iSCSI sessions under a
target).
Overwrite the specified iSCSI configuration file
with ONLY the current iSCSI global settings
and the active iSCSI targets‟ configuration to
the specified iSCSI configuration file.
Will delete any non-active targets'
configuration from the specified file.
The -f option MUST be specified along with
this option.
Display the help messages.
Start the Chelsio iSNS client.
server=<IP address>[:<port>] where server
is the iSNS server address. The port is optional
and if it‟s not specified it defaults to 3205. The
server with the ip address is mandatory and if
it‟s not specified the, the command will be
45