Chelsio T5 Installation And User Manual page 46

Chapter 5. Software/Driver Configuration and Fine-tuning
5.9.4. chisns options
Mandatory
Options
Parameters
-h
server=<IP
address>
[:<port>]
Chelsio T5 iSCSI PDU Offload Target with SCST support for Linux
Optional
Parameters
id=<isns entity
id>
query=<query
interval>
denied.
id=<isns entity id> where id is the iSNS entity
ID used to register with the server. It defaults
to <hostname>.
query=<query interval> where query is the
initiator query interval (in seconds). It defaults
to 60 seconds.
Examples:
chisns server=192.0.2.10
chisns server=192.0.2.10:3205 id=isnscln2
query=30
In the first example the minimum command set
is given where the IP address of the iSNS
server is specified.
In the second example a fully qualified
command is specified by also setting three
optional parameters. Here, the mandatory IP
address and the corresponding optional port
number are specified. Also set is the iSNS
entity ID to "isnscln2" as well as the query
interval to 30 seconds.
Description
Display the help messages.
Start the Chelsio iSNS client.
server=<IP address>[:<port>] where server is
the iSNS server address. The port is optional and
if it's not specified it defaults to 3205. The server
with the ip address is mandatory and if it's not
specified the, the command will be denied.
id=<isns entity id> where id is the iSNS entity ID
used to register with the server.
<hostname>.
query=<query interval> where query is the
initiator query interval (in seconds). It defaults to
60 seconds.
Examples:
chisns server=192.0.2.10
chisns server=192.0.2.10:3205
query=30
In the first example the minimum command set is
given where the IP address of the iSNS server is
specified.
In the second example a fully qualified command is
specified by also setting three optional parameters.
It defaults to
id=isnscln2
46