Chelsio T5 Installation And User Manual page 11

Chapter 2. Hardware Installation
07:00.5 SCSI storage controller: Chelsio Communications Inc T520-LL-CR
Unified Wire Storage Controller
07:00.6 Fibre Channel: Chelsio Communications Inc T520-LL-CR Unified Wire
Storage Controller
For Chelsio T5 adapters, the physical functions are currently assigned as:
Physical functions 0 - 3: for the SR-IOV functions of the adapter
Physical function 4: for all NIC functions of the adapter
Physical function 5: for iSCSI
Physical function 6: for FCoE
Physical function 7: Currently not assigned
Once driver package is installed and loaded, examine the output of
discovered.
eth0: Chelsio T520-CR rev 0 1000/10GBASE-SFP RNIC MSI-X, Offload capable
0000:08:00.4: S/N: PT02141133, P/N: 110116050D0
The above outputs indicate the hardware configuration of the adapters as well as the Serial
numbers.
Network device names for Chelsio's physical ports are assigned using the following
Note
convention: the port farthest from the motherboard will appear as the first network
interface. However, for T5 40G adapters, the association of physical Ethernet ports
and their corresponding network device names is opposite. For these adapters, the
port nearest to the motherboard will appear as the first network interface.
Chelsio T5 iSCSI PDU Offload Target with SCST support for Linux
dmesg
to see if the card is
11