Table of Contents
Advertisement
DKC301DC SLIDING GATE OPERATOR INSTALLATION AND USER'S MANUAL
1. Important Safety Warning
PLEASE READ THESE IMPORTANT SAFETY RULES. Failure to comply with the following safety
rules may result in serious personal injury and/or property damage.
●
ALL installation, repair, and service work must be carried out by a qualified technician.
●
DISCONNECT the power cord from the MAINS before making installation, and/or any repairs
(eg welding) or removing the covers! Only experienced service personnel can remove the cover
of the control system.
●
CLOSING OBSTRUCTION FORCE can be set and is adjustable on installation so that the
gate(s) reverse when obstruct with PRESSURE. This test must be repeated regular interval and
the necessary adjustments made if required.
●
DO NOT operate the Gate Opener unless the Gates are in full view and free from objects such
as cars and children/people. SERIOUS PERSONAL INJURY and/or property damage can result
from failure to follow this warning.
●
Children are NOT allowed to play near or operate automatic gates.
●
Always keep people and objects away from the gate and its area of travel.
●
The Gate should be installed on flat, level ground and can be moved and slide freely in both
directions along the entire gate length.
●
Secure all easily-accessed gate opener controls in order to prevent unauthorized use
of the gate.
●
In the event of power failure, use an emergency release key to operate the gate manually.
●
When using the Auto close mode a PHOTOELECTRIC BEAM must be correctly fitted and
correctly tested for operation at regular intervals. EXTREME CAUTION is recommended when
using the Auto close mode. All the safety rules must be followed.
2. Technical Parameters
Power supply
Gear teeth
Gate moving speed
Output Torque
Output Speed
Maxi. Gate Weight
Control board
Limit Switch
Battery charger
Standard operation with back up battery
Degree of Protection
Duty Cycle
Model
Motor
Tab.1
DKC301DC
AC240V, 50Hz
DC24V 100W
16 teeth
10m/min
≤500kg
Encoder limit switch
0.35A@24V
8 times
S2, 20%
3
10N.m
50rpm
KZB21
IP44
Hide quick links:
Advertisement
Table of Contents
