Status LEDs
Six status LEDs indicate the operating states of the WiSM2 module.
operation.
Table 1
LED Label
SYSTEM
ALARM
78-16318-01
Status LED Descriptions
Color
Description
Green/Amber
System Status:
•
•
•
•
•
•
•
•
Catalyst 6500 Series Wireless Services Module 2 Installation and Verification Note
During system power-up:
SYSTEM blinks amber.
–
ALARM is continuous amber.
–
During system boot:
SYSTEM blinks green.
–
ALARM is continuous amber.
–
After bootup:
SYSTEM is continuous green.
–
ALARM is off.
–
During controller image upgrade:
SYSTEM is continuous green.
–
–
ALARM blinks green.
System crash:
–
SYSTEM is continuous amber.
–
ALARM is off.
Firmware Error:
SYSTEM is continuous amber.
–
ALARM is continuous amber.
–
Power cycle the controller to clear the
Note
firmware error.
Internal Voltage Error:
SYSTEM blinks amber.
–
ALARM is continuous amber.
–
Temperature Error:
SYSTEM is off.
–
ALARM blinks amber.
–
Note
Check for blocked air vents and fans on the
chassis.
Table 1
describes the status LED
3