Table of Contents
Advertisement
When fuses are used in a product, replace
with the same type and rating for
continued protection against fire hazard.
Chassis connections must only be used as
shield connections for measuring circuits,
NOT as safety earth ground connections.
If you are using a test fixture, keep the lid
closed while power is applied to the
device under test. Safe operation requires
the use of a lid interlock.
Instrumentation and accessories shall not
be connected to humans.
Before performing any maintenance,
disconnect the line cord and all test
cables.
To maintain protection from electric shock
and fire, replacement components in
mains circuits - including the power
transformer, test leads, and input jacks -
must be purchased from Keysight.
Standard fuses with applicable national
safety approvals may be used if the rating
and type are the same. Other components
that are not safety related may be
purchased from other suppliers as long as
they are equivalent to the original
component (note that selected parts
should be purchased only through
Keysight to maintain accuracy and
functionality of the product). If you are
unsure about the applicability of a
replacement component, call an Keysight
office for information.
No operator serviceable parts inside.Refer
servicing to qualified personnel. To
prevent electrical shock do not remove
covers. For continued protection against
fire hazard, replace fuse with same type
and rating.
PRODUCT MARKINGS:
The CE mark is a registered trademark of
the European Community.
Australian Communication and Media
Authority mark to indicate regulatory
compliance as a registered supplier.
This symbol indicates product compliance
with the Canadian Interference-Causing
Equipment Standard (ICES-001). It also
identifies the product is an Industrial
Scientific and Medical Group 1 Class A
product (CISPR 11, Clause 4).
South Korean Class A EMC Declaration. This
equipment is Class A suitable for
professional use and is for use in
electromagnetic environments outside of the
home.
This product complies with the WEEE
Directive marketing requirement. The affixed
product label (above) indicates that you
must not discard this electrical/electronic
product in domestic household waste.
Product Category: With reference to the
equipment types in the WEEE directive
Annex 1, this product is classified as
"Monitoring and Control instrumentation"
product. Do not dispose in domestic
household waste. To return unwanted
products, contact your local Keysight office,
or for more information see
keysight.com/en/companyinfo/environment
/takeback.shtml
This symbol indicates the instrument is
sensitive to electrostatic discharge (ESD).
ESD can damage the highly sensitive
components in your instrument. ESD
damage is most likely to occur as the
module is being installed or when cables
are connected or disconnected. Protect
the circuits from ESD damage by wearing
a grounding strap that provides a high
resistance path to ground. Alternatively,
ground yourself to discharge any builtup
static charge by touching the outer shell
of any grounded instrument chassis
before touching the port connectors.
This symbol on an instrument means
caution, risk of danger. You should refer
to the operating instructions located in
the user documentation in all cases where
the symbol is marked on the instrument.
This symbol indicates the time period
during which no hazardous or toxic
substance elements are expected to leak
or deteriorate during normal use. Forty
years is the expected useful life of the
product.
http://about.
Advertisement
Table of Contents
