Table of Contents
Advertisement
Keysight M9383A PXIe Vector Signal Generator
Install the software. Note the following order when installing software.
3.
Install Microsoft Visual Studio 2010 with .NET Visual C# running on
Windows 7.
You can also use a free version of Visual Studio Express 2010 tools
from:
http://www.microsoft.com/visualstudio/eng/products/visual-
studio-2010-express
The following steps, defined in the Keysight M9393A PXIe VSA Startup
Guide,
but repeated here, must be completed before
programmatically controlling the M9393A PXIe VSA hardware with IVI
drivers.
Install Keysight IO Libraries Suite (IOLS), Version 16.3.17218.1 or
newer; this installation includes Keysight Connections Expert.
(Required for MIMO) Install Keysight 89600 Vector Signal Analyzer
Software, Version 16.2 or newer.
Install the M9393A PXIe Performance VSA driver software, Version
1.0.0.0 or newer.
Install the M938xA PXIe VSG driver software, Version 1.3.105.0 or
newer.
Install the M9018A PXIe Chassis driver software, Version 1.3.443.1 or
newer.
Driver software includes all IVI-COM, IVI-C, and LabVIEW G Drivers
along with Soft Front Panel (SFP) programs and documentation. All of
these items may be downloaded from the Keysight product websites:
http://www.keysight.com/find/iosuite
Support
Download the Keysight IO Libraries Suite Recommended.
http://www.keysight.com/find/89600
Select
Software
corresponds to "89600 VSA software".
http://www.keysight.com/find/m9393a
Support
Download the
http://www.keysight.com/find/m9381a
Support
Download the
http://www.keysight.com/find/m9018a
Support
Download the
http://www.keysight.com/find/ivi
for Keysight IVI-COM drivers.
Install the hardware modules and make cable connections.
4.
Verify operation of the modules (or the system that the modules create).
5.
> Select the
Drivers, Firmware & Software
Technical Support
> Select the
tab > Download the
Instrument Driver
> Select the
Drivers, Firmware & Software
Instrument Driver
> Select the
Drivers, Firmware & Software
Instrument Driver
> Select the
Drivers, Firmware & Software
Instrument Driver
> Select Technical
tab >
(Required for MIMO) >
Drivers, Firmware &
that
> Select Technical
tab >
.
> Select Technical
tab >
.
> Select Technical
tab >
.
- download other installers
10
Advertisement
Table of Contents
