Download Print this page
Cognex DataMan 50 Reference Manual
Cognex DataMan 50 Reference Manual

Cognex DataMan 50 Reference Manual

Control box
Hide thumbs Also See for DataMan 50:

Advertisement

Quick Links

COGNEX
®
DataMan
50/60 Control Box
®
Reference Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the DataMan 50 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Cognex DataMan 50

  • Page 1 COGNEX ® DataMan 50/60 Control Box ® Reference Guide...
  • Page 2 TUNE button to work. The DataMan Control Box has two buttons and a buzzer. The buttons are connected to Input lines 0 and 1 on the DataMan 50 and 60. The buzzer is connected on the Output 0 line.
  • Page 3 • Output-Strobe can only be used in TTL mode, not in Open collector see the following image, which shows the pinout of the I/O cable on the mode. The maximum load current at Output-Strobe is reduced by DataMan 50 and 60. 4mA. Color...
  • Page 4: Compliance Statements

    Cognex Corporation shall not be liable for use of our If you need more information on the collection, ence to radio communications. Operation of this product with equipment (i.e., power supplies, personal...
  • Page 5 Copyright © 2013 Cognex Corporation All Rights Reserved. This document may not be copied in whole or in part, nor transferred to any other media or language, without the written permission of Cognex Corporation. The hardware and portions of the software described in this document may be covered by one or more of the U.S.

This manual is also suitable for:

Dataman 60