Dolphin BC5083-01 User Manual page 22

TAP INSTALLATION
10.If your model is DB 475, connect the power supply connector from the electronic
unit coming from the tap base to the transformer.
11.Assemble the temporary protective cover panel to the tap box.
12.Once the works on electricity, plumbing and tiles have been finished, insert the wall
rosette through the tap base.
13.Connect the cable leading to the solenoid and the power supply cable at the spout
to those at the tap base. Fix the tap spout by inserting the nipple into the tap base.
Make sure that this area is clean before proceeding. Secure the screw with the Allen
key. Make sure that the aerator at the tap spout will be installed facing the washbasin.
STEP 2 – CONNECTING THE POWER SOURCE
3. If your model is DB 450 the battery box is attached to the
cover panel. Connect the battery box connector to the
electronic unit connector.
4. If your model is DB 475, plug the transformer into the
electricity socket.
12 | Dolphin Blue | DBL400 / DBL425 / DBXL450 / DBXL475 Series
1. Remove the temporary protective cover panel.
Important: tap was supplied with
A Self Adjusting Sensor. The ideal sensor range for the
specific location will be set automatically. Right now,
check that no objects are in front of the sensor
besides the washbasin.
2. Now remove the protecting sticker that covers the
sensor.