Dolphin BC5083-01 User Manual page 20

TAP INSTALLATION
STEP 3 – CONNECTING THE POWER SOURCE
1a. For DB/L/XL 400: Connect the other cable
coming from the electronic unit at the Tap
base to the battery box.
1b. For DB/L/XL 425: Connect the other cable
coming from the electronic unit at the Tap
base to the transformer. Plug the
transformer into the electricity socket.
2. After you have connected the power
source (Battery or Transformer) wait 15
seconds in order to allow the system to set
the ideal sensor range.
As an indication that the self adjusting is taking place, a red light in the sensor eye will
flash continuously. The solenoid valve will be opened and closed for 1 second as an
indication that the ideal sensor range was set and the product is ready for use.
3. Turn on the central water supply. Check for leaks.
Note: This tap includes a special aerator that allows you to adjust the water stream
direction on site in order to prevent water splashing if needed. To change the angle
of the water stream, simply move the adjustable tilting
plate by pressing it smoothly.
4. If the automatically adjusted sensor range is not
satisfactory, please refer to the section entitled "Settings
adjustment".
10 | Dolphin Blue | DBL400 / DBL425 / DBXL450 / DBXL475 Series