Dolphin BC5083-01 User Manual page 19

TAP INSTALLATION
STEP 2 – CONNECTING THE WATER SUPPLY
1. Fit the flexible pipe coming from the Tap base
to the solenoid valve housing.
2. Fit the water supply inlet to the adapter at the
solenoid valve housing. Inlet and outlet should
follow the indicating arrow at the solenoid
housing.
Note: Make sure the filter is located at the
solenoid inlet.
3. Connect the cable coming from the electronic unit to the solenoid valve.
Important: Tap was supplied with a Self Adjusting Sensor. The ideal sensor range for
the specific location will be set automatically.
Before proceeding to step 3 check that
no objects are in front of the sensor
besides the washbasin.
Now, remove the protecting
sticker that covers the sensor.
DBL400 / DBL425 / DBXL450 / DBXL475 Series | Dolphin Blue | 9