Inspection And Preparation Before Use - Taiji TSK-110A Operating Instructions Manual

Inspection and Preparations Before Use
1. Check the instruction manual, and the accessories.
2. Choose a place for the sake warmer.
• A level, stable place.
• A well-ventilated place.
• A place away from heat sources, such as a gas burner and cooking range, and free from exposure to
direct sunlight. (Keep the sake warmer at least 50 cm away from them.)
• A place not so humid, not exposed to water.
3. Use an independent outlet.
Be sure to plug the power cable to an electrical outlet of 110 - 120V AC 15 A minimum or 220 - 240 V AC 7.5
A minimum, to which nothing else is connected.
4. Adjust the server bottle holder.
Loosen the server bottle holder screw, place your server bottle in the holder, adjust the server bottle holder up
or down so that the nozzle end will be about 2 cm in the server bottle.
(The machine automatically stops discharging the sake when the nozzle end touches the sake in the server
bottle.)
∗ The nozzle may not work depending on the server bottle shape. Check it in advance.
<Fig. 1>
-4-
<Fig. 2>