Advertisement
Advertisement
Table of Contents
Related Manuals for Taiji Ti-2
Summary of Contents for Taiji Ti-2
-
Page 1: Operating Instructions
Operating Instructions Sake Warmer Ti-2... -
Page 2: Table Of Contents
CONTENTS Safety Precautions ........... 3 After Use ..............9 Purpose of Use ............4 After-Sale Service ..........10 Operation ..............5 Specifications ............10 Names of Parts ............5 Accessories ............10 Inspection and Installation Before Use ....6 Instructions for Use ..........7 Caution: Before attempting to operate this product, please read the label on the surface of the unit. -
Page 3: Safety Precautions
Safety Precautions •E Carefully read the Safety Precautions to correctly use the product. •E The Safety Precautions are for you to use the product safely and correctly, and to prevent danger and dam- age to you and others. The Safety Precautions are shown in two categories, Warning and Caution, to clearly show the degree of danger and damage which could be caused by wrong handling. -
Page 4: Purpose Of Use
(11) Discharge remaining sake from the machine after pull out the power plug and ask your dealer or use. If sake remains in the machine after use, it Taiji for after-sale service. changes in color. Discharge sake and clean the machine inside. -
Page 5: Operation
Operation The product is an indirect heating type electric sake warmer in which the water in the warming tank is Thermal sensor heated by a heater and in which sake flows through the titan heat-exchanger pipe heated by the water. Warming tank Warming temperature is adjusted by controlling the warming tank temperature with a temperature regula-... -
Page 6: Inspection And Installation Before Use
Inspection and Installation Before Use 1. Take the product out of the package, Outlet without a grounding terminal Ask your dealer for the required Class 3 ground- and check the manual for operating ing. (In this case, grounding must be done by a instructions, and accessories. -
Page 7: Instructions For Use
Instructions for Use * Read [Inspection and Installation Before Use], page 6, and install the machine properly before using it. Preparations Insert the power plug into an electrical outlet. Check the water level meter pipe that it is fixed. Figure 1 Check the water level meter for the level of water in the sake warm- ing tank. - Page 8 Switch power on and turn the temperature knob to your desired Figure 6 temperature position. (Figure 6) (Heater lamp) • One graduation corresponds to about 4°C. • If a temperature higher than the sake warming tank is set, the (Hot) heater lamp lights, indicating that the heater begins to heat.
- Page 9 After Use Discharge sake from the machine. Figure 9 (1) Have a container ready, and discharge the sake out of the sake tank through the sake drain cock into the container. When the sake tank is empty, return the sake drain cock to the closed position.
- Page 10 1 pc Funnel ............1 pc Fixing angle ........... 1 set The specifications and external view are subject to partial change for improvement without notice. Please access the Home page of Taiji & Co., Ltd. at the following address. http://www.taiji.co.jp/ -10-...
- Page 12 TAIJI & CO., LTD. Kawasaki, Japan (0803C) Printed in Japan...