Names of Parts
Power cord
Check and Preparation before Use
1. Take the product out of the container box, and confirm that all accessories and
the instruction manual are provided.
2. Remove the plastic bag used for packaging the product, and install the product.
Installation location
- Flat and steady surface
- Well-ventilated location
- Location not affected by heat, i.e., away from direct sunlight,
gas cookers, cooking range, and other heat sources
(at least 50 cm away from any heat source).
- Avoid high-humidity areas and locations near water.
3. Connect the power cord.
Connect the power cord to the main unit deeply and firmly,
and insert the power plug into the outlet.
Be sure to connect the ground to prevent electric shock.
Tub
Wooden
frame
Power lamp
Power switch
Temperature
adjustment knob
Lid
Drain board
Digital thermometer
Water level line
Thermometer
holder
Main
body
Bottle cap
PTC heater