Table of Contents
Advertisement
SETUP MODE RESET
displayed.
Press button 1 briefly to keep
the settings.
SETUP MODE EXIT
played.
Press and hold the alternative
button 4 to reset all paramet-
ers.
Factory setting adopted for
DYNA PRO
riding mode:
DTC: DYNA
ENGINE: DYNA
RESET
flashes 3 times.
SETUP MODE EXIT
is
played.
Press button 1 briefly to return
to the settings menu page.
SETUP DTC
is dis-
Press and hold the button 4 to
SETUP MODE
permit
SETUP MODE DYNA PRO
ENTER
is displayed.
is dis-
Press the button 1 repeatedly
until
Press and hold button 1.
The on-board computer read-
ings appear on the display.
is displayed.
Deactivate the RDC for
off-roading
.
Requirement
The motorcycle should be driven
with reduced tyre pressure when
off road.
Requirement
Either the ENDURO or ENDURO
PRO riding mode has been set
SETUP EXIT
is shown.
4
79
z
Advertisement
Table of Contents
