Table of Contents
Advertisement
3
NOTICE
You can deactivate RDC warn-
40
ings for riding in off-road mode.
NOTICE
Before adjusting the tyre pres-
sure, observe the information
on temperature compensation
and pressure adaptation in the
chapter "Engineering details":
Temperature compensation
(
131)
Have the tyre checked for
z
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
If you are unsure whether the
vehicle can be ridden with the
tyre in its present condition:
Do not continue your journey.
Notify the breakdown service.
Sensor is faulty or there is
a system fault
with tyre pressure control
OE
(RDC)
General warning light shows
yellow.
The tyre symbol with one
or two arrows appears in
the display.
Possible cause:
Vehicle is fitted with wheels not
equipped with RDC sensors.
Fit wheels and tyres equipped
with RDC sensors.
Possible cause:
1 or 2 RDC sensors have failed
or a system error has occurred.
Have the fault rectified by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Signal transmission
disrupted
with tyre pressure control
OE
(RDC)
--
-- --
"
" or "
" is displayed.
Possible cause:
The vehicle has not reached the
minimum speed (
131).
RDC sensor is not active
min 30 km/h (The RDC sensor
does not transmit its signal
to the vehicle until a certain
minimum speed has been
reached.)
Observe the RDC display at
higher speeds.
A permanent fault is
present only when the
general warning light also lights
up.
Under these circumstances:
Advertisement
Table of Contents
