Table of Contents
Advertisement
socket is switched off when this
happens.
Comply with the operating in-
structions of the charger.
NOTICE
If you are unable to charge the
battery through the on-board
socket, you may be using a char-
ger that is not compatible with
your motorcycle's electronics. If
this happens, charge the battery
directly at the terminals of the
battery that is disconnected from
the vehicle.
Charging battery when
disconnected
Charge the battery using a
suitable charger.
Comply with the operating in-
structions of the charger.
Once the battery is fully
charged, disconnect the
charger's terminal clips from
the battery terminals.
NOTICE
The battery has to be recharged
at regular intervals in the course
of a lengthy period of disuse.
See the instructions for caring
for your battery. Always fully re-
charge the battery before restor-
ing it to use.
Removing battery
Switch off the ignition.
Remove screw 1.
Each battery cover slightly for-
ward at the top at positions 2.
In order not to damage the bat-
tery cover or the mount, work
the battery cover up at posi-
tion 3 to remove.
with alarm system (DWA)
If applicable, switch off the anti-
theft alarm.
Disconnect battery negative
lead 1 and disengage rubber
strap 2.
8
163
OE
z
Advertisement
Table of Contents
