Network Configuration (For Printer Models That Support Wired/Wireless Network Features); Wired Network Configuration (For Printer Models That Support Wired Network Features); Wireless Network Configuration (For Printer Models That Support Wireless Network Features); Wireless Lan Protected Setup - Sharp DX-B352P Manual

4. Network Configuration (For printer models that support
wired/wireless network features)
4.1. Wired Network Configuration (For printer models that
support wired network features)
Printers that support wired network printing can be connected to a LAN or WAN, thereby
the printer will work through a wired network connection.
In this option, the printer is directly connected to the network and can be set to allow all
computers on the network to print directly on the printer and achieve network shared printing.
Before starting the printer, first, connect the network cable to the network port of the printer and
ensure both the printer and the computer are under the same network environment to directly
connect the printer to the network. For detail installation steps, please refer to Chapter 3.
4.2. Wireless Network Configuration (For printer models that
support wireless network features)
For printer models that support Wireless LAN features, users can connect the printer with the
wireless network through "Wireless LAN Protected Setup", "Web Server Setup" or "Wireless
LAN Configuration Tool".
Note: • The printer can connect with both the wired and wireless network at the same
time.

4.2.1. Wireless LAN Protected Setup

If the wireless router to which the printer is going to be connected supports the Wireless
LAN Protected Setup feature, it will be not necessary for users to use the computer,
instead, they can just use the "Wireless LAN" button on the control panel of the printer to
complete the connection between the printer and the wireless network.
Setup Method: Press and hold the "Wireless LAN" button on the control panel of the
printer for about 2 seconds to start the Wireless LAN Protected Setup, with the indicator of
"Wireless LAN" button beginning to flash.
Press the WPS button on the wireless router after 2 minutes of the launching, then the
printer will be connected to the wireless network.
Wireless Workstation Mode
The printer communicates with the
wireless device via the access point.
25