Page 2
경고 화재 또는 쇼크의 위험을 막으려면 플레이어 를 비 또는 습기에 노출시키지 마십시오. 전기적 층격을 방지하려면 제품 외장을 열지 마십시오. 제품 수리는 전문 기술자에게 문 의하시기 바랍니다. 경고 책장 또는 붙박이 캐비닛과 같이 제한된 공간 에 제품을 설치하지 마십시오. 화재 또는 쇼크의 위험을 막으려면 제품 위에 꽃병과...
목차 목차 목차 목차 목차 기본 작동 오디오 CD 또는 MP3 파일 재생하기 ..4 라디오 듣기 ............8 테이프 재생하기 ..........10 테이프에 녹음하기 ......... 12 CD 플레이어 표시창 사용하기 ..........14 곡의 특정 부분을 찾으려면 ......15 곡을 반복하여 들으려면(반복 재생) ..16 랜덤...
기본 작동 오디오 CD 또는 MP3 파일 재생하기 부속 AC 전원 코드를 연결합니다(27페이지 참조). POWER 버튼을 눌러 플레이어를 켭 POWER 니다. 기능 스위치를 CD로 설정합니다. ZPUSH OPEN/CLOSE 버튼을 눌 ZPUSH 러 CD 컴파트먼트 덮개를 열고 CD OPEN/CLOSE 를 CD 컴파트먼트에 넣습니다. CD의...
Page 5
표시판 u 버튼 (리모컨 N 버튼)을 누릅니 다. 번호 플레이어는 모든 곡을 한 번씩 재생합 니다. BAND/ AUTO PRESET MP3 파일 CD를 재생하려면 6페이 지를 참조하십시오. 재생 시간 부가 작동을 위한 버튼 안내 PUSH OPEN/CLOSE .,> VOLUME – POWER 알아두기 마지막으로...
Page 6
오디오 CD 또는 MP3 파일 재생하기 (계속) MP3 파일 CD 재생하기 PUSH OPEN/CLOSE 기능 스위치 .,> TUNE•FOLDER – MP3 인디케이터 참고 파일을 재생하기 전에 플레이 POWER 버튼을 눌러 플레이어를 켭니다. 어는 CD의 모든 파일과 폴더 정보를 읽습니다. 기능 스위치를 CD로 설정합니다. 파일...
Page 7
폴더를 선택합니다 참고 • MP3 파일을 포함하지 않은 TUNE•FOLDER + 버튼이나 TUNE•FOLDER - 버튼 폴더는 스킵됩니다. (리모컨 FOLDER +, - 버튼)을 누릅니다. • 최대 폴더 수: 255 • 최대 합계의 폴더와 파일 수 파일을 선택합니다 는 512개입니다. 앞으로 가려면 > 버튼, 뒤로 가려면 . 버튼을 누릅니 •...
라디오 듣기 부속 AC 전원 코드를 연결합니다(27페이지 참조). POWER 버튼을 눌러 플레이어를 켭 POWER 니다. 기능 스위치를 RADIO로 설정합니 다. 표시창 표시창에 원하는 방송 대역이 나타날 때까지 BAND/AUTO PRESET 버튼을 반복하여 누릅니다. BAND/ AUTO PRESET 버튼을 누를 때마다 방송 대역이 아래 와...
Page 9
부가 작동을 위한 버튼 안내 POWER VOLUME – MODE 부가 작동 누름 알아두기 음량 조절 VOLUME +*, - • FM 대역에 잡음이 많으면 (리모컨 VOL* +, - 버튼) MODE 버튼을 여러 번 누릅 플레이어 켜기/끄기 POWER 니다. 이 경우 표시창에 “Mono”...
테이프 재생하기 부속 AC 전원 코드를 연결합니다(27페이지 참조). POWER 버튼을 눌러 플레이어를 켭 POWER 니다. 표시창 기능 스위치를 TAPE로 설정합니다. xZ버튼을 눌러 테이프 컴파트먼트 재생하고자 하는 면이 위를 를 열고 녹음된 테이프를 넣습니다. 향하도록 넣습니다. 테이프를 앞으로 밀어 넣습니다. 노출된 테이프를 건드리지 않도록 주의하십시오.
Page 11
부가 작동을 위한 버튼 안내 VOLUME – POWER 부가 작동 누름 음량 조절 VOLUME +*, - (리모컨 VOL* +, - 버튼) 재생 정지 앞으로 또는 뒤로 빨리감기 m 또는 M 재생 일시정지 일시정지 후, 리줌 재생하려면 이 버 튼을 다시 누릅니다. 카세트...
테이프에 녹음하기 부속 AC 전원 코드를 연결합니다(27페이지 참조). POWER 버튼을 눌러 플레이어를 켭 POWER 니다. xZ 버튼을 눌러 테이프 컴파트먼트 녹음하고자 하는 면이 위를 향하도록 넣습니다. 를 열고 공 테이프를 넣습니다. 테이프를 앞으로 밀어 넣습니다. 노출된 테이프를 건드리지 않도록 주의하십시오. TYPE I(노말) 테이프만을...
Page 13
녹음을 시작하려면 z 버튼을 누릅니 다. (N 버튼이 자동으로 눌러집니다.) 부가 작동을 위한 버튼 안내 기능 스위치 POWER MODE 알아두기 부가 작동 누름 • 볼륨 조절은 녹음 레벨이나 녹음 중단 오디오 엠퍼시스(22페이지 참조)에 영향을 미치지 않습 녹음 일시정지 니다. 녹음을 다시 시작하려면 이 버튼을 •...
CD 플레이어 MP3 파일 CD 정보를 확인하기 표시창 사용하기 CD의 전체 폴더 수와 전체 곡 수 확인하려면 표시창에 “00”이 나타날 때까지 x 버튼을 누 표시창을 사용하여 CD 정보를 확인할 수 있 른 후, DISPLAY/ENTER 버튼을 누릅니 습니다. 다. 전체 폴더수 전체...
참고 곡의 특정 부분을 찾으 • 번호 버튼들을 사용하여 특정 곡을 찾는 방법은 선택한 폴더 내의 곡만 가능합니다. 려면 • 만약 “SHUF” 또는 “PGM”이 표시창에 점등되 면 특정 곡의 위치를 찾을 수 없습니다. x 버튼을 눌러 표시를 끄십시오. CD를 재생하는 동안 곡의 특정 부분을 신속 하게...
반복 재생을 취소하려면 곡을 반복하여 들으려면 표시창에 “REP” 표시가 사라질 때까지 REPEAT 버튼을 누릅니다. (반복 재생) MP3 파일 재생의 경우 표준, 셔플 또는 프로그램 재생 모드에서 곡 “REP”을 선택하면 플레이어는 CD의 모든 을 반복하여 재생할 수 있습니다. 파일을 반복하여 재생합니다. 기능...
셔플 재생을 취소하려면 랜덤 곡 재생하기 표시창에 “SHUF” 표시가 사라질 때까지 MODE 버튼을 누릅니다. (셔플 재생) MP3 파일 재생의 경우 무작위로 곡을 재생할 수 있습니다. 플레이어는 무작위로 CD의 모든 파일을 재 기능 스위치 생합니다. 특정 폴더의 파일만을 무작위로 재생하려면 셔플 재생을 하기 전에 TUNE•FOLDER + 또는...
프로그램을 취소하려면 프로그램 만들기 정지 모드에서 표시창에 “PGM” 표시가 사 라질 때까지 MODE 버튼을 누릅니다. (프로그램 재생) 재생하기 전에 재생 순서를 확인하려면 CD에 있는 최대 20곡의 재생 순서를 정할 수 플레이어의 DISPLAY/ENTER 버튼을 여 있습니다. 러 번 누릅니다. 버튼을 누를 때마다 곡 번호가 프로그래밍된 POWER DISPLAY SLEEP...
Page 19
MP3 폴더를 프로그램하려면 폴더를 프로그램할 수 있습니다(폴더에 있는 모든 파일). 1 표시창에 “PGM” 표시가 깜박이고 “FOLDER” 표시가 나타날 때까지 정지 모드에서 MODE 버튼을 여러 번 누릅니 다. 2 플레이어의 TUNE•FOLDER + 또는 - 버튼을 눌러 폴더를 선택하고 플레이어의 DISPLAY/ENTER 버튼을 누릅니다. 3 2번...
라디오 라디오 선국을 자동으로 저장할 수 없는 경우 라디오 선국 저장하기 약한 신호를 이용하여 선국을 수동으로 저장 해야 합니다. 라디오 선국을 플레이어 메모리에 저장할 수 1 기능 스위치를 RADIO로 설정합니다. 있습니다. 저장 가능한 라디오 선국은 최대 2 BAND/AUTO PRESET 버튼을 눌러 30개이며...
저장한 라디오 선국 듣 기 선국을 저장한 후에는 PRESET 버튼을 이 용하여 즐겨 듣는 선국을 쉽게 찾을 수 있습 니다. BAND/ 기능 스위치 AUTO PRESET .,> 기능 스위치를 RADIO로 설정합니다. BAND/AUTO PRESET 버튼을 눌 러 원하는 방송 대역을 선택합니다. . 또는 > 버튼을 여러 번 눌러 저 ...
오디오 엠퍼시스 오디오 엠퍼시스 선택하기 (S-BASS) 청취 중인 사운드의 오디오 엠퍼시스를 조절 할 수 있습니다. S-BASS 베이스음을 보강하려면 S-BASS 버튼을 누릅니다. 표시창에 “S-BASS” 표시가 나타납니다. 표준 사운드로 돌아 가려면 다시 버튼을 누릅 니다.
타이머 12시간 표시와 24시간 표시를 전환하려면 시계 설정하기 3번 단계 전에 MODE 버튼을 누릅니다. 시계를 설정하기 전까지 “--:--”가 표시창 전원이 켜져 있는 동안 현재 시간을 확인하려 에 표시됩니다. 면 CLOCK 버튼을 누릅니다. DISPLAY/ENTER 취소하려면 다시 한 번 누릅니다. CLOCK .,> MODE 시계를...
음악/알람 기능 설정하기 ‘시’를 나타내는 숫자가 깜박일 때까지 ALARM/TIMER 버튼을 누릅니다. 음악, 라디오 프로그램 또는 알람에 맞춰 설 정한 시간에 잠에서 깨어 날 수 있습니다. 먼저 시계를 설정하시기 바랍니다(23페이지 의 “시계 설정하기”). 타이머 알람 기능 스위치 POWER . 또는 > 버튼을 눌러 음악이 시작 SNOOZE 되기...
Page 25
음악 재생/알람 시간을 확인/변경하려면 참고 표시창에 ‘시’를 나타내는 숫자가 깜박일 때 타이머를 설정해 테이프를 재생/녹음하지 마십시 오. 오작동의 원인이 되거나 테이프가 손상될 수 있 까지 ALARM/TIMER 버튼을 누르고 습니다. DISPLAY/ENTER 버튼을 누릅니다. DISPLAY/ENTER 버튼을 누를 때마다 알아두기 저장된 설정이 설정 순서대로 표시됩니다. •...
슬립 타이머를 취소하려면 음악 들으며 잠들기 “OFF” 표시가 나타날 때까지 SLEEP 버튼 을 여러 번 누릅니다. 또는, POWER 버튼을 눌러 플레이어를 끕 플레이어가 10, 20, 30, 60, 90, 120 분 후에 자동으로 꺼지도록 설정할 수 있기 때문에 음 니다. 악을 들으며 잠자리에 들 수 있습니다. 참고...
설정 전원 선택하기 AC 전원과 건전지를 사용할 수 있습니다. 3 건전지 컴파트먼트 AC IN 1 벽면 콘센트에 AC 전원 코드 연결하기 리모컨에 건전지 넣기 부속 AC 전원 코드의 한쪽 끝을 플레이 어 뒷면에 있는 AC IN 소켓에 끼우고 다 른 한쪽 끝은 벽면 콘센트에 연결합니다. AM 튜닝...
Page 28
전원 선택하기 (계속) 건전지로 플레이어를 사용하려면 R20(D 사이즈) 건전지 6개(별매)를 건 전지함에 넣습니다. 건전지로 플레이어를 사용하려면 AC 전원 코드를 연결하지 마십시오. 건전지 교환하기 OPR/BATT 표시가 흐려지거나 플레이어 의 작동이 정지하면 건전지를 교환해 주십시 오. 모든 건전지를 새 것으로 교환해 주십시 오.
부가 정보 사용 장소 안전 주의 사항 • 열이 발생하는 곳 근처, 직사광선에 노출될 위험이 있거나 먼지가 많은 장소 또는 기계 적 충격의 위험이 있는 장소에 플레이어를 안전 경고 두지 마십시오. • CD 플레이어 부분에 사용된 레이저 빔은 • 기울거나 안정되지 않은 장소에 플레이어 눈에...
Page 30
안전 주의 사항 (계속) CD-R/CD-RW에 대해 본 CD 플레이어는 CD-DA 포맷*으로 기록 된 CD-R/CD-RW를 재생할 수 있습니다. 카세트 참고 그러나 재생 성능은 디스크 품질과 기록 장치 • 실수로 녹음되는 것을 방지하려면 A 또는 의 상태에 따라 달라질 수 있습니다. B면의 카세트 탭을 제거합니다. 나중에 다 * CD-DA는...
CD 플레이어 문제 해결 CD를 넣어도 CD가 재생되지 않거나 “no DISC” 표시가 나타납니다. 일반적인 문제 • CD의 라벨면이 위를 향하게 넣습니다. • CD를 청소합니다. 전원이 켜지지 않습니다. • CD를 꺼낸 후 CD 컴파트먼트를 약 한 시간 동 • 전원 코드를 AC IN 소켓과 벽면 콘센트에 단 안...
Page 32
문제 해결 (계속) 리모컨 리모컨이 작동하지 않습니다. 테이프 플레이어 • 리모컨의 전전지가 약하면 모든 건전지를 새 것으로 교환해 주십시오. 작동 버튼을 눌러도 테이프가 움직이지 않습니다. • 플레이어의 리모컨 센서에 리모컨을 정확히 • 테이프 컴파트먼트를 꼭 닫습니다. 향하도록 하십시오. • 플레이어와 리모컨 사이에 있는 장애물을 제 REC z 버튼이...
테이프 헤드 자기 제거하기 제품 관리 테이프를 20-30시간 사용한 후에는 테이프 헤드에 잔여 자기가 많이 쌓여 고주파음과 히 스음이 손실되기 시작합니다. 이런 경우에는 렌즈 청소하기 시중 유통되는 테이프 헤드 자기 제거제를 사 렌즈가 더러워지면 CD 작동 중 음이 튀는 현 용해...
일반 규격 제품 규격 스피커 풀 레인지: 8 cm dia., 4 Ω, 원형(2) 출력 CD 플레이어 부분 PHONES(해드폰) 잭(스테레오 미니잭): 16 - 68 Ω 임피던스 헤드폰의 경우 시스템 최대 전원 출력 컴팩트 디스크 디지털 오디오 시스템 레이저 다이오드 속성 전원 요구량 재질: GaAlAs CD 스트레오...
폴더/파일에 사용할 수 있는 개수 “MP3”에 대해 • 최대 폴더 수: 255 • 최대 합계의 폴더와 파일 수는 512개입니 다. MP3란? MP3(MPEG 1 Audio Layer-3)는 고음 압축 소프트웨어와 쓰기 소프트웨어의 설정 질 압축 표준 기술의 한가지입니다. 파일이 • 음악 소스를 MP3 파일로 압축할 경우, 압 약...
Page 36
“ MP3 ” 에 대해 (계속) “ID3 태그”에 대해 ID3 태그는 MP3 파일에 특정한 정보(곡명, 가수명, 앨범명 등)을 추가하기 위한 포맷입 니다. 본 플레이어는 ID3 태그 포맷 1.1버전에 대 응하고 있습니다. 파일에 ID3 태그 정보가 있으면 “곡명”, “가수명” 그리고 “앨범명”이 표시됩니다.
Page 37
색인 가, 나, 다 아 파, 하 건전지 연결하기 표시창 14 리모컨의 경우 27 AC 전원 코드 27 표시창 사용하기 14 플레이어의 경우 28 오디오 엠퍼시스 22 프로그램 만들기 18 곡의 특정 부분을 찾으려면 프로그램 재생 18 자 알파벳 전원 27 라...
Page 38
Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Warning Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Page 39
Table of contents Basic Operations Playing an audio CD or MP3 files ....4 Listening to the radio ........8 Playing a tape ..........10 Recording on a tape ........12 The CD Player Using the display .......... 14 Locating a specific point in a track ....15 Playing tracks repeatedly (Repeat Play) ..
Basic Operations Playing an audio CD or MP3 files Connect the supplied AC power cord (see page 27). Press POWER to turn on the player. POWER Set the function switch to CD. Press ZPUSH OPEN/CLOSE to ZPUSH open the lid of the CD compartment OPEN/CLOSE and place a CD on the CD compartment.
Page 41
Display Press u (N on the remote). Track number The player plays all the tracks once. To play a CD with MP3 files, see BAND/ page 6. AUTO PRESET Playing time Use these buttons for additional operations PUSH OPEN/CLOSE .,> VOLUME –...
Page 42
Playing an audio CD or MP3 files (continued) Playing a CD with MP3 files PUSH OPEN/CLOSE Function switch .,> TUNE•FOLDER – MP3 indicator Note Before playing a file, this Press POWER to turn on the player. player reads all file and folder information on the CD.
Page 43
To select a folder Notes • A folder that does not Press TUNE•FOLDER + or TUNE•FOLDER – (FOLDER include an MP3 file is +, – on the remote). skipped. • Maximum folder number: To select a file Press > to go forward and . to go backward. •...
Listening to the radio Connect the supplied AC power cord (see page 27). Press POWER to turn on the player. POWER Set the function switch to RADIO. Display Press BAND/AUTO PRESET repeatedly until the band you want appears in the display. BAND/ AUTO PRESET Each time you press the button, the...
Page 45
Use these buttons for additional operations POWER VOLUME – MODE Press Tips adjust the volume VOLUME +*, – • If the FM broadcast is (VOL* +, – on the remote) noisy, press MODE turn on/off the player POWER repeatedly so that “Mono” appears in the display and * VOLUME + has a tactile dot.
Playing a tape Connect the supplied AC power cord (see page 27). Press POWER to turn on the player. POWER Display Set the function switch to TAPE. With the side you want Press xZ to open the tape to play facing up compartment and insert a recorded tape.
Page 47
Use these buttons for additional operations VOLUME – POWER Press adjust the volume VOLUME +*, – (VOL* +, – on the remote) stop playback m or M fast-forward or rewind the tape pause playback Press the button again to resume play after pause. eject the cassette turn on/off the player POWER...
Recording on a tape Connect the supplied AC power cord (see page 27). POWER Press POWER to turn on the player. Press xZ to open the tape With the side you want to record on facing up compartment and insert a blank tape. Push the tape forward until it stops.
Page 49
Press z to start recording. (N is depressed automatically.) Use these buttons for additional operations Function switch POWER MODE Tips Press • Adjusting the volume or the stop recording audio emphasis (see page 22) will not affect the pause recording recording level.
The CD Player Checking the information of a Using the display CD with MP3 files You can check information about the CD To check the total folder number using the display. and total track number on the Press x until “00” appears in the display, then press DISPLAY/ENTER.
Notes Locating a specific • Locating a specific track using the number buttons is only available for the tracks in the point in a track selected folder. • You cannot locate a specific track if “SHUF” or “PGM” is lit in the display. Turn off the You can quickly find a specific point in indication by pressing x.
To cancel repeat play Playing tracks Press REPEAT until “REP” disappears from the display. repeatedly (Repeat Play) When playing MP3 files You can play tracks repeatedly in normal, When you select “REP”, the player plays all shuffle or program play mode. files of a CD repeatedly.
To cancel shuffle play Playing tracks in Press MODE until “SHUF” disappears from the display. random order (Shuffle Play) When playing MP3 files You can play tracks in random order. The player plays all files of a CD in random Function switch order.
To cancel the program Creating your own In stop mode, press MODE until “PGM” disappears from the display. program (Program Play) To check the order of tracks You can arrange the playing order of up to before play 20 tracks on a CD. Press DISPLAY/ENTER on the player repeatedly.
Page 55
To program MP3 folders You can make a program by the folder (all the files in the folder). 1 Press MODE repeatedly in stop mode until “PGM” flashes and “FOLDER” appears in the display. 2 Press TUNE•FOLDER + or – on the player to select a folder and then press DISPLAY/ENTER on the player.
The Radio If a station cannot be preset Presetting radio stations automatically You need to preset a station with a weak signal manually. You can store radio stations into the player’s memory. You can preset up to 30 radio 1 Set the function switch to RADIO. stations, 20 for FM and 10 for AM in any 2 Press BAND/AUTO PRESET to select the order.
Playing preset radio stations Once you have preset the stations, use PRESET to tune in the stored stations. BAND/ Function switch AUTO PRESET .,> Set the function switch to RADIO. Press BAND/AUTO PRESET to select the band. Press . or > repeatedly to tune in the stored station.
The Audio Emphasis Selecting the audio emphasis (S-BASS) You can adjust the audio emphasis of the sound you are listening to. S-BASS Reinforcing the bass sound Press S-BASS. “S-BASS” appears in the display. To return to normal sound, press the button again.
The Timer To switch between the 12-hour Setting the clock and 24-hour standards Press MODE before step 3. “– –:– –” appears in the display until you set the clock. To display the current time while the power is on DISPLAY/ENTER Press CLOCK.
Waking up to music/ Hold down ALARM/TIMER until the hour digits flash. alarm You can wake up to music, a radio program or alarm sound at a preset time. Make sure that you have set the clock Timer Alarm (“Setting the clock” on page 23). Set the timer to the hour you want the Function switch music or alarm to start by pressing...
Page 61
To check/change when the Note playback/alarm will start Do not try timer playback of a tape or timer recording. Doing so causes the player to Press ALARM/TIMER until the hour digit malfunction or damage to the tape. flashes in the display, then press DISPLAY/ ENTER.
To cancel the sleep timer Falling asleep to music Press SLEEP repeatedly until “OFF” is displayed. You can set the player to turn off Alternatively, press POWER to turn off the automatically after 10, 20, 30, 60, 90, and player. 120 minutes, allowing you to fall asleep while listening to music.
Setting Up Choosing the power sources You can use the AC power or batteries as a power source. 3 Battery compartment AC IN 1 to a wall outlet Connecting the AC power cord Inserting batteries into the remote Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet.
Page 64
Choosing the power sources (continued) Using the player on batteries Insert six R20 (size D) batteries (not supplied) into the battery compartment. To use the player on batteries, disconnect the AC power cord from the player. Replacing batteries Replace the batteries when the OPR/BATT indicator dims or when the player stops operating.
Additional Information On placement Precautions • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical On safety shock. • As the laser beam used in the CD player •...
Page 66
Wipe the CD from the center out. If you have any questions or problems concerning your player, please consult your nearest Aiwa dealer. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
CD player Troubleshooting The CD does not play or “no DISC” is displayed even when a CD is in place. General • Place the CD with the label surface up. • Clean the CD. The power is not on. • Take out the CD and leave the CD •...
Troubleshooting (continued) Remote The remote does not function. Tape player • Replace all the batteries in the remote with new ones if they are weak. The tape does not move when you press • Make sure that you are pointing the remote at an operation button.
Demagnetizing the tape heads Maintenance After 20 to 30 hours of use, enough residual magnetism will have built up on the tape heads to begin to cause loss of high Cleaning the lens frequency sound and hiss. At this time, you If the lens becomes dirty, it may cause a should demagnetize the heads and all metal skipping of sound during CD operation.
General Specifications Speaker Full range: 8 cm dia., 4 Ω, cone type (2) Output PHONES (Headphones) jack (stereo minijack): CD player section For 16 - 68 Ω impedance headphones System Maximum power output Compact disc digital audio system Laser diode properties Power requirements Material: GaAlAs For the CD stereo radio cassette recorder:...
THE USABLE NUMBER OF About “MP3” FOLDERS/FILES • Maximum folder number: 255 • The maximum number of folders and files What is the MP3? in total is 512. MP3 (MPEG 1 Audio Layer-3) is a standard technology and format for compressing a SETTINGS FOR COMPRESSION sound sequence.
Page 72
About “MP3” (continued) About “ID3 tag” ID3 tag is a format for adding certain information (song title, artist name, album name, etc.) to MP3 files. This player conforms to Version 1.1 of the ID3 tag format. If the file has the ID3 tag information, “song title”, “artist name”...
Index Audio emphasis 22 Listening S-BASS 22 to the radio 8 Selecting Locating a specific point 15 audio emphasis 22 tracks 5 Batteries Setting the clock 23 M, N, O for player 28 Setting up 27 for remote 27 Shuffle play 17 About “MP3”...
Need help?
Do you have a question about the CSD-AM700 and is the answer not in the manual?
Questions and answers