The Radio; Presetting Radio Stations - Aiwa CSD-AM700 Operating Instructions Manual

The Radio

Presetting radio stations

You can store radio stations into the player's
memory. You can preset up to 30 radio
stations, 20 for FM and 10 for AM in any
order.
Function switch
TUNE•FOLDER
DISPLAY/ENTER
1
Set the function switch to RADIO.
2
Press BAND/AUTO PRESET to select
the band.
3
Hold down BAND/AUTO PRESET for
2 seconds until "AUTO" appears in the
display.
4
Press DISPLAY/ENTER.
The stations are stored in memory from
the lower frequencies to the higher ones.
GB
20
BAND/
AUTO PRESET
.,>
+ –
,
If a station cannot be preset
automatically
You need to preset a station with a weak
signal manually.
1 Set the function switch to RADIO.
2 Press BAND/AUTO PRESET to select the
band.
3 Tune in the station you want with
TUNE•FOLDER + or –.
4 Hold down DISPLAY/ENTER for 2
seconds until the preset number starts
flashing.
5 Select the preset number you want to
preset the new station on by pressing .
or > repeatedly.
6 Press DISPLAY/ENTER.
The new station replaces the old one.
On the remote
1 Press BAND until the band you want
appears in the display.
2 Tune in a station you want.
3 Hold down the number button that you
want to preset the new station on for about
2 seconds.
To select the preset number over 10, press
>10 first, then the corresponding number
buttons.
You need to hold down the last number
button to enter for about 2 seconds.
(Example: To select 12, press >10 and 1
first, then hold down 2 for about 2 seconds.)