Waking Up To Music/Alarm - Aiwa CSD-AM700 Operating Instructions Manual

Waking up to music/
alarm
You can wake up to music, a radio program
or alarm sound at a preset time.
Make sure that you have set the clock
("Setting the clock" on page 23).
POWER
SNOOZE
DISPLAY/ENTER
1
Press POWER to turn on the player.
2
Set the function switch to CD, RADIO
or TAPE.
When TAPE is selected, the player
functions as an alarm clock generating
beep sound at a specified time.
3
When CD or RADIO is selected,
prepare the music source you want to
play.
To play
radio
a CD
GB
24
Function switch
.,>
ALARM/TIMER
VOLUME
+ –
,
Do this
Tune in a station.
Insert a CD.
4
Hold down ALARM/TIMER until the
hour digits flash.
Timer
5
Set the timer to the hour you want the
music or alarm to start by pressing
. or >, then press DISPLAY/
ENTER.
The hour stops flashing and the minutes
start flashing.
Set the minutes by pressing . or
>, then press DISPLAY/ENTER.
6
Press VOLUME + or – to set the
volume, then press DISPLAY/ENTER.
When TAPE (alarm function) is
selected, the alarm volume stays at a
constant level even if you increase/
decrease the setting.
7
Press POWER to turn off the player.
The timer (" ") or alarm ("
indication remains lit in the display.
At the preset time, the power will go on,
and the music or alarm will start.
Then, after 60 minutes have passed the
power will go off and the player will
enter the standby mode again.
Alarm
")