Symbols
Table 1 is a list of symbols used on the Product or in this manual.
Symbol
Consult user documentation.
W
WARNING. RISK OF DANGER.
X
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
Earth
AC (Alternating Current)
Battery
OK
Electrical breakdown
T
Double Insulated
Interference is present. Displayed value might be outside of specified accuracy.
Do not use in distribution systems with voltages higher than 1100 V.
Ramp mode indicator
Conforms to relevant South Korean EMC standards.
Conforms to relevant Australian EMC standards.
)
Certified by CSA Group to North American safety standards.
P
Conforms to European Union directives.
Certified by TÜV SÜD Product Service.
Measurement Category II is applicable to test and measuring circuits connected directly to
utilization points (socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building's low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the
source of the building's low-voltage MAINS installation.
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
~
waste. Product Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted municipal waste.
Table 1. Symbols
Meaning
Insulation Tester
Symbols
5