Install The Gsd Files In Step7 - Weidmuller SAI Active Universal Pro Series Manual

Commissioning the PROFIBUS-DP
6.3

Install the GSD files in Step7

1 Open the respective project in the programme Step7 and select the hardware configuration.
Figure 61 Installing the GSD file: step 1
NOTE
Close all Step7 applications before continuing with the following commands.
2 Select the command Extras > Refresh Catalogue to update the contents of the catalogue in the hardware
configurator.
Figure 62 Installing the GSD file: step 2
When selecting the PROFIBUS-DB device, look under
PROFIBUS-DP => Additional field devices => WIN SAI-AU for the Weidmueller SAI modules.
Figure 63 The Weidmueller SAI module
98 5663600000/1.4/09.09