Adding An Subbus Module - Weidmuller SAI Active Universal Pro Series Manual

6.4.1

Adding an Subbus module

Example SAI-AU M12 SB M12 CNT
The hardware configuration with a PROFIBUS DP
enabled central processing unit (CPU 315-2 DP)
has been launched and a PROFIBUS DP master
system has been defined for this CPU.
Figure 66 Configuration
2 Select by double click the slave in the table to set the assembly properties (e.g., the parametres).
Figure 67 window address / ID
5663600000/1.4/09.09
Commissioning the PROFIBUS-DP
1 Select by double click the CNT M12 module to
paste it in the professional PROFIBUS DP master
system.
101