Marking / Labelling - Weidmuller SAI Active Universal Pro Series Manual

Mounting SAIs

Marking / labelling

Twenty transparent markers in a MultiCard frame
are included in the range of supply of the SAI dis-
tributors. These allow you to individually mark the
I/O connections as well as the distributor. For the
gateway I/O, either two normal or one longer marker
can be used to specifically mark the distributor.
Please refer to Figure 11 Putting the
markers on the gateway I/O.
Weidmueller has various printers and plotters avail-
able to achieve professional printing results. For ad-
vice and a demonstration, please contact your
Weidmueller partner.
To achieve rapid manual on-site marking results, we
recommend our fibre pen STI-S.
Please also refer to Appendix A: Product
Overview.
NOTE
Please note that you should not stick
markers on top of one another. Nor
should you use coloured markers since
they can cover up the LEDs below them.
Figure 11 Putting the markers on the gateway I/O
26
Figure 12 Putting the markers on the extension
I/O
5663600000/1.4/09.09