3. Install nozzle body with new gasket.
a. Tighten screw securely.
4. Assemble new seal to choke shaft and insert into carbu-
retor body.
a. Install choke plate.
Note: Use LOCTITE® 222 on screw threads.
5. Install emulsion tube body with new gasket.
a. Tighten screw securely.
6. Assemble inlet needle to float and install float.
a. Assemble bowl gasket to body.
6
TSM
NOZZLE
BODY
Fig. 15 − Install Nozzle Body
CHOKE
PLATE
SEAL
Fig. 16 − Install Choke Shaft
Fig. 17 − Install Emulsion Tube Body
INLET NEEDLE
FLOAT
Fig. 18 − Install Float
GASKET
EMULSION
TUBE BODY