Table of Contents
Advertisement
25
Low Vision Controller
Optional Components
Low Vision Controller
In order to switch or mix two image sources, please use
the Low Vision Controller.
Installation
Connect the output of VISULEX Maki and the second
desired image source, e.g. a computer to the inputs of
the low vision controller (Input 1, Input 2). Connect the
output of the low vision controller (Monitor Output) to
the monitor.
Operation
Use the keys on the low vision controller to control the
the switching or mixing of the images. In the following,
you will be given a short instruction to the most
important keys and their functions.
Fixed half
Key:
Use this key to define the fixed half. The fixed half will be
displayed as full image when image mixing is switched
off.
Depending on the selected split screen mode, you can
choose between right/left, up/down.
Split Screen Mode
Key:
Use this key to define the split screen mode. You can
choose between up/down or right/left.
Advertisement
Table of Contents
