Standby-Modes - Papenmeier VISULEX Maki User Manual

20
20

Standby-Modes

Standby-Modes
VISULEX Maki has got two different standby modes.
The first standby mode reacts to movements within the
image. You are able to define the time in the on-screen
menu or you can switch off the standby mode
completely. If no image change has been detected in the
set time, the LED Light will switch off and the image will
turn black. You are able to exit stand-by mode by means
of a gesture under the camera, by pressing a key or by
turning the rotary knob.
Please note that also small changes of brightness,
vibrations or shadows will cause an image change.
The second standby mode is independent from the first
one and cannot be configured. If there has not been any
operation on the device during 30 minutes, this stand-by
mode will be activated. You are able to exit this stand-by
mode by pressing a key or by turning the rotary knob.