Key 1 - Colour Modes - Papenmeier VISULEX Maki User Manual

Key 1 – Colour modes
Perform a short press on Key 1 to switch between colour
modes. The following colour modes are available:
 True Colour
 Greyscale
 Pseudocolour
 Pseudocolour inverse
After the mode "Pseudocolour inverse", the mode "True
Colour" will be selected again.
True Colour:
When the mode "True Colour" is selected and a long
press on Key 1 is performed, the colour saturation can be
set. By means of the rotary knob, you can select the
optimum colour saturation according to your needs. By
pressing on the rotary knob the changed value will
confirmed.
Pseudocolour / Pseudocolour inverse:
When the mode "Pseudocolour" or "Pseudocolour
invert" is selected and a long press on Key 1 is
performed, the Pseudocolour combination can be
chosen. By means of the rotary knob, you can select the
optimum Pseudocolour combination according to your
needs. By pressing on the rotary knob the selected
combination will confirmed.
Control Panel
13