Table of Contents
Advertisement
24
24
The on-screen menu
Standby
In Standby mode, the LED is deactivated and the image
will turn black. In order to quit standby mode, simply
make a wiping gesture under the camera.
The on-screen menu presents you the following line:
Standby: <5 min>
By means of the rotary knob, you can set the time after
which the Standby mode is to be activated. In order to
deactivate the Standby mode, turn the rotary knob to
the left until you read <OFF>.
Confirm your selection by pressing on the rotary knob.
You will get back to the previous menu.
Info
In this menu, you will obtain information about your
VISULEX Maki. Among other things, you will find the
version number which should be available if service
support is required.
Advertisement
Table of Contents
